Specifications：
² Input Voltage: 6-13V
² Output Voltage: 4.8-9.6V( default voltage: 5.2V)
² Output Current: 0-15A (Max. 20A)
² Dimension: 65*27*35mm
² Weight: 60g
Features：
² Use high definition nixie tube, number will still clearly visible even in the sunshine.
² Short for Onboard equipment, integration in electronic switch, voltage input and output display and large current UBEC.
² Three-position nixie tube displays input and output voltage timely, assist you to get know the power supply status in the first time.
² Output voltage: 4.8-9.6V, suitable for all kinds of high and low voltage servos and receivers in market.
² Large output current: 15 A (MAX.20A), beneficial to provide continuous sufficient operating current for servo.
² Working voltage: 6-13V, applicable to get power from Lipo, Ni-MH, Ni-Cd, A123 Li-Fe and other batteries directly.
² If powered off suddenly while operating, it will keep outputting voltage normally when powered on.
Use Method:
² Long press on red button for 2 seconds to start. (Indicator light shows long time, nixie tube prompts inputting voltage after 3 seconds; Indicator light flashes, nixie tube prompts outputting voltage after 3 seconds.)
² Long press on red button for 2 seconds to turn off.
² On state, short press on red button to switch to output voltage (red indicator light flashes); Short press on red button again to switch to input voltage (red indicator light shows); Voltage will calculatedly show if short press again.
² If need to adjust the output voltage, short press on red button to switch to output voltage. Use a Straight screwdriver to adjust the potentiometer at the tail of the step-down transformer. Counterclockwise rotation for output voltage value decrease and clockwise rotation for output voltage value increase.
Kindly Remark：
² Battery negative and positive pole are not allowed to be connected in an opposite way.
² Not allowed to be exposure to oil or water, even exposed to something corrosive when installation.
² Pay attention to air ventilation when using large power.
² Kindly suggest using high quality batteries to supply power, bad batteries will impact the stability of power supply and even lose control caused by power shortage.
