Your position: Home / Multicopter & Accessories / MFD&Arkbird Acc.

Arkbird Airspeed Sensor Airspeed Meter for Arkbird Autopilot V2.0/ V3.1028 OSD

    Please select the information you wantX
  • Type:
    For V3.1028 For V2.0
(1999 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(9)

Type A: for Arkbird V3.1028 flight control

Type B: for Arkbird V2.0 flight control



If your OSD Version is V3.1025 please update your firmware to V3.1028, then it can use our airspeed meter

If you use our new product Autopilot 2.0 ,it can use it directly, thanks.

The digital high accuracy airspeed meter of Arkbird 2.0, can calculate the relative speed between the plane and air, which is different from GPS ground speed. As the air speed is a necessary condition for generation of lift force. Insufficient airspeed may cause stall. The airspeed meter collects the speed in front of the plane. As to flying in windy days or when flight is heavy-loaded, it will increase throttle when flying upwind and decrease when flying downwind.

Extension 3P wire can be used. Do not make the orifice get close to the motor so as to avoid airflow interference. After power on, it will be calibrated automatically within 10 seconds. During this period, do not touch the orifice.


Temperature: -50~80 Celsius Degrees

Power Supply: 2.5-5.5 V

Output protocol only for Arkbird Device 




Average rating: 5.0 based on 9 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
luxury tressesMeirucorp dollhouse miniature work boots for menMagnetic Wristband