Introduction:

ISTONE-AII is a 6-axis Gyro & Stabilizer for airplane, suitable for normal wing, fly-wing, and V-tail airplanes. It is used to connect with the receiver to control the flight, supports Gyro Off, Normal, Aerobatic, and Auto-balance (Safe) modes, compatible with DSM, S.BUS, and PWM receivers. You can set the programmable items via a 3-in-1 program card.

Features:

- 32-bit high-performance ARM MCU, 6-axis sensor chipset

- Original attitude stabilization algorithm and control algorithm

- Support normal wing, fly wing, and V-tail airplanes

- Support mode switch via MODE channel, can switch between different modes

- Four flight modes: Gyro Off Mode, Normal Mode, Aerobatic Mode, and Auto-balance (Safe) Mode

- Set the programmable items (aileron/roll/rudder gain, level offset, flight mode, etc.) via 3-in-1 program card

- Support DSM, S.BUS and PWM receivers

- Mini size, supporting different mounting directions (face up, down, left, and right)

- You can switch to Auto-balance (Safe) Mode when the aircraft flying unstable or you cannot control very well

Specifications:

- Main Controller: 32-bit ARM MCU

- Sensor: 6-axis gyro

- Gyro Scale Range: -2000dps ~ +2000dps

- Accelerometer Scale Range: -4g ~ +4g

- Input Signal: PWM, Futaba S.BUS, DSM

- Output Signal: PWM (71.4Hz)

- Input Voltage: 4.8V ~ 7.4V

- Operating Temp: -20℃ ~ 70℃

- Dimensions: 36.5*29.4*12.6mm

- Weight: 10g

Package Includes:

ISTONE-AII Gyro & Stabilizer ×1pc

3-signal wire ×1pc

Anti-shock double sided tape ×2pcs

Single-signal wire ×2pcs