Features:
- The LED light board uses 6pcs/8pcs RGB5050 LED chips. There are in all 7 colors by combinations of the color-control switches.
- Max. power 1.9W, ultra-light.
- Can be used on lights DIY on quadcopter, QAV, airplane, helicopter, car etc.
Specifications:
|
Item |
Specifications |
|
|
LED18 |
X6-12V |
X8-16V |
|
Input |
DC10-13V, 3S LiPo, 12V BEC |
DC14-17V,4S LiPo |
|
Weight |
Approx. 2.4g |
Approx. 2.5g |
|
Dimensions |
Φ30mm, Pitch-row 10mm, Bore Φ3mm |
|
Technical Parameters:
|
Switch-Control |
X6-12V |
X8-16V |
|
B ON = Blue |
0.6W, 50mA |
0.64W, 40mA |
|
R ON = Red |
0.6W, 50mA |
0.64W, 40mA |
|
G ON = Green |
0.6W, 50mA |
0.64W, 40mA |
|
B+R ON = Magenta |
1.2W, 100mA |
1.28W, 80mA |
|
B+G ON = Cyan |
1.2W, 100mA |
1.28W, 80mA |
|
R+G ON = Yellow |
1.2W, 100mA |
1.28W, 80mA |
|
B+R+G ON = White |
1.8W, 150mA |
1.92W, 120mA |
Note: 16V LED circle can be lighted up by 3S LIPO battery, but the luminance is very low.
Package Includes:
1 x LED Circle
1 x 30cm Power Cord
Notice for Use:
- Packed with a 30cm red and black power cord, users should cut and weld it according to their needs.
- Pay attention to anode, cathode and insulation of input.
- 7 colors will be selected according to the corresponding switches.
- LED circle should be stuck on the multicopter.
- LED board is of high brightness, please do not look in the eye for a long time.
Warm Tips:
We also have 5V 12V 16V Strip Lights, click here
www.sdshobby.com/other-electronic-acc/rgb-tricolor-led-7color-switch-control-led-light-board-led-strip-for-qav-quadcopter-helicopter-rc-airplane.html
For wholesales, please contact with service.
